AC Tech Drives Lenze Americas
Home | Contact Us | Sitemap
(844) 331-9371


Home   >   Products   >   Kendrion/magneta   >   Products

Magneta Kendrion Group

(844) 331-9371       (888) 723-4773 (Fax)

Electromagnetic Clutches & Brakes

magneta electromagnetic clutches and brakes transmit the torque and brake torque through dry running friction material. With DC voltage applied, the torque is transmitted without backlash. Using the prestressed spring of the armature, a release, free of residual torque is ensured. These clutches and brakes can be installed in any mounting position and hardly need any maintenance.

  • Standard clutches according to the catalogue 0.3 - 3.6 Nm
    • Flange-mounted clutch with customer specific chain wheel
    • Shaft mounted clutch Type 14.100.**.303
    • Flange-mounted brake Type 14.110.**.101
  • Application clutches up to 5 Nm are available depending on the customer's requirement.
Lenze magneta Electromagnetic Clutches & Brakes Distributors

If you are looking for magneta Products, please call us at (844) 331-9371 or email us at we will do our best to help you find the electromagnetic clutch that you are looking for at the most competitive prices possible. If you are searching for electromagnetic brake technical information (data-sheets) please use the datasheets or product selection guide page links.

Permanent Magnet Brakes

Kendrion (Aerzen) Permanent magnet brakes open electromagnetically. The braking torque without backlash is generated by permanent magnets. The brakes can be installed in any position. High quality magnets ensure safe functionality. The rated torque is achieved immediately at the time of delivery without any running-in procedure.

  • Outer diameter: 31 mm
    • Type
    • Type
    • Type
  • Outer diameter: 14 mm Type
  • Outer diameter: 23,5 mm Type
magneta PM Small Size & High Torque Permanent Magnet Brake Distributor

Clutch Brake Units

Electromagnetic clutches and brakes should be easy to install and integrate into the machinery concept/layout with no setting up or running in. magneta offers a combination fitted on a hollow shaft for applications where clutches and brakes work together. The units are based on the successful magneta components. They are fitted on a through shaft. The unit is fixed using simply two screws and is ready for operation then.

  • for applications with high frequencies
  • quick and easy installation
  • installation without setting work
  • factory set airgaps
  • easy mounting and dismounting if service is required
magneta Clutch Brake Units Distributors
Clutch Brake Units

Magnetic Particle Clutches & Brakes

The main characteristic of the magnetic particle clutch is the possibility to smoothly change the torque depending on the field voltage. To transmit the torque from the external to the internal rotor, specifically alloyed and highly abrasion-resistant iron particles are inserted into the particle gap. Depending on the electromagnetic field, these fine iron particles build magnetic chains and thus transmit the torque. The power of the field determines the stability of the particle chains and also the transmittable torque.

  • Clutch with spade connectors Type 14.501.*03.11
  • Clutch with slip rings Type 14.502.**.12
  • Brake with spade connectors Type 14.512.**.22
magneta Magnetic Particle Clutches & Brakes Distributors


The Controller 14.422 serves to excite the magnetic particle clutches and brakes. The excitation current can be influenced by a dancer potentiometer or a master voltage. The built-in current controller ensures that, despite varying coil temperature the current is constant. Other important features of the controller are: Setpoint integrator, control amplifier and temperature monitoring through an optional thermal switch at the magnetic particle clutch or brake. Should the body temperature become too high, the controller simply switches off.

  • Enclosed unit Type 14.422.04.230
  • Built-in-unit without transformer with setpoint potentiometer Type 14.422.01.042
  • Transformer Type 14.422.02.230
magneta 14.422 Controllers Distributors

Whether we have magneta permanent magnet brake in stock in Boise, Idaho or need to ship direct from Lenze to any USA cities; ACTECHDRIVES.COM can get clutch brake units to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct magnetic particle clutch & brake in the USA, Canada, or Mexico. It will be very helpful if you have the controllers part numbers ready, then our sales representatives can provide you with a pricing and availability quote for magneta cluthes that you are looking for in seconds. If you do not have the part numbers for magneta brakes, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Lenze Motors

For Optimum Protection of three-phase AC motors against ambient conditions, the surface and corrosion protection system (OKS) offers tailor-made solutions. Various surface coatings ensure that the motors operate reliably even at high air humidity, in outdoor installation or in the presence of atmospheric impurities. Any colour from the RAL Classic collection can be chosen for the top coat. The three-phase AC motors are also

Packaging Solutions

The Lenze Americas solution uses PositionServo drives as master and slave to provide web tension, PositionServo drives with Lenze Servo gearboxes and MCS motors for pump control, and SMVectors running the main unwinding reel. The PositionServos control the rollers that "draw" the material into the area where the bottom is heat sealed, then the liquid is pumped into it and the material indexes down to the next area where the sides