SCD Series
Standard Features
Enclosure:
IP20
Control Terminals
Digital Inputs (Active low, NPN)
1 Dedicated Stop
1 Dedicated Start
3 Programmable
Digital Outputs:
2 Open Collector (NPN)
Analog Inputs:
1 Programmable for voltage (0-10 VDC) or current (4-20mA)
Analog Outputs:
2 Outputs (0-10 VDC, 2-10 VDC can be converted to 4-20mA) proportional to speed and load
Serial Communications:
DeviceNet™ Standard 5-Wire port for programming, monitoring and controlling
Other:
Digital Input Reference
Analog Signal Common
12 VDC 50mA Supply
Programmable Features:
Carrier Freq. 4 – 10 kHz
Independent Accel and Decel Ramps
2nd Accel / decal ramp
Auxiliary Ramp to Stop
240 Hz Maximum Output Freq.
DC Injection Braking
Speed References:
Keypad
JOG (Fwd or Rev)
Floating Point Control (MOP)
0-10 VDC Analog Reference (scalable)
4-20mA Analog Reference (scalable)
Potentiometer
8 Programmable Preset Speeds
DeviceNet™ Serial Speed Reference
Standards and Conformance
UL & cUL (North America)
CE (Europe)
Low Voltage Directive (EN61800-5-1)
EMC Directive (EN61800-3) when suitably filtered
Two Year Warranty
Options:
Dynamic Braking
Packaged Dynamic brake option includes control and resistors in an easy to implement solution for fast stopping or deceleration requirements.
EMC Filter
To meet the EU requirements for susceptibility and emissions of electrical and radiated noise (EN 61800-3 and EN 5501). The footprint design allows the filter to mount between the panel and the drive providing the most efficient use of panel space.
Thru-Hole Mounting
This option allows the inverter heatsink to be mounted through the back of the electrical enclosure or cubicle to reduce overall enclosure size. The heatsink is anodized and gasketed for use in NEMA 4X environments.