The simple planetary gearbox comprises of the coaxial sun gear, planet carrier and outer gear sub-assemblies, and is combined with the planet gears rotating at constant centres about the planet carrier. The input is from the sun gear and the drive motion to the planet carrier is via the planet gears. The rolling contact of the planet gears with the outer gear provides the appropriate ratio.
Multi-stage gearboxes are available by connecting the individual stages in sequence. Within the gear unit combination the individual stages are sized to their torque requirement. Right angle drive combinations are also available with integral Vogel spiral bevel gear units.
If you are looking for Vogel Planetary Gearboxes, please call us at (800) 894-0412 or email us at firstname.lastname@example.org we will do our best to help you find the Vogel type P/PH planetary gear boxes that you are looking for at the most competitive prices possible. If you are searching for Vogel type PF/PFH planetary box technical information (data-sheets) please use the datasheets or product selection guide page links.
It is essential that the motor shaft and the bore on the clamping sleeve are dirt and grease free. Take the clamping bush and fit it to the motor shaft back to the shaft shoulder. Then tighten the coupling screws to the recommended torque. Do this in 3 steps eitherway with 20%, 50% and then 100%. The recommended torque can be found on a sticker on the coupling. Grease the tooth profile of the clumping bush. With the gearbox in the vertical position and the input flange facing upwards mount the motor onto the gearbox and tighten the motor flange/gearbox fixing bolts.
It is essential that the motor shaft and the bore on the profiled bush are dirt and grease free. Take the profiled bush together with the shrink disc and fit it to the motor shaft back to the shaft shoulder. Then tighten the coupling screws to the recommended torque, which can be found on a sticker on the coupling. Grease the tooth profile of the profiled bush. With the gearbox in the vertical position and the input flange facing upwards mount the motor onto the gearbox and tighten the motor flange/gearbox fixing bolts.
The connection between motor and gearbox is made using a shrink disc bush without a keyway. For maximum performance we recommend the use of motors with reduced shaft tolerance and concentricity according to DIN 42955 R standards. When fitting the motor, position the gearbox vertically with the motor flange upwards. Before assembly, degrease the motor shaft and the blind hole in the gearbox. Remove the lock screw or two plastic plugs from the motor flange of the gearbox, and insert a long Allen key to reach the tangential clamping screw in the coupling. The coupling must first be turned to the correct position for the screw to be accessible. Lower the motor vertically with the motor shaft in the blind hole. Ensure that the motor shaft has completely entered the bore, and that the flanges of motor and gearbox are in contact with each other over their full surface. The motor flange screws can now be inserted (do not tighten them completely). Then tighten the screws of the coupling with the required tightening torque. Do this in 3 steps alternately with 20%, 50% and then 100%. The tightening torque is marked on the coupling in Nm. Finish tightening the motor flange screws. After assembly, it is important to reinsert the lock screw or plastic plugs into their holes.
Whether we have Vogel type MP/MPH planetary gearbox in stock in Boise Idaho or need to ship direct from Lenze Americas to any USA cities; ACTECHDRIVES.COM can get Vogel type MPF/MPFH planetary gearboxes to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct Vogel type LP/LPF planetary gearbox in the USA, Canada, or Mexico. It will be very helpful if you have the Vogel type MLP/MLPF planetary gearbox part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Vogel type LPH/LPFH planetary gearboxes that you are looking for in seconds. If you do not have the part numbers for Vogel type MLPH/MLPFH planetary gearbox, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
In Combination with Synchronous & asynchronous servomotors, our planetary gearbox form a compact and powerful drive unit. Numerous options at the input end provide for the drive to be easily and precisely adapted to your application. The equipment includes all the options available as standard and all the built-on accessories of the product. The g700 can be used in conjunction with Lenze's synchronous and
The IP66 spring-applied brake with manual release is a cost saving alternative for standard solutions. Intorq's BFK471-25 new high-performance braking system has been developed for use in crane systems, port facilities, ship winches, hoists, and belt conveyors. A new manual release has been designed specifically for this brake meeting the high requirements of the enclosure rating. The modular structure of the brake enables