Home > Products
> Lenze Global Drives > Servo Drives
The PositionServo series of drives have it all. From basic torque and velocity control to
fully programmable coordinated motion, you choose your level of control.
As a distributed drive/control solution, avoid all of the costly cables and connections and
put the power of the motion controller in the same package as the drive.
With 17 programmable I/O points, machine control becomes easy with one packaged solution.
Each drive ships with MotionView OnBoard. MotionView is the programming, set-up and diagnostic
tool; it is embedded into the drive and can be called up from any web browser over Ethernet.
Communication and networking are handled over Ethernet as a standard, but the drive can also
provide options for EtherNet/IP, DeviceNet, CANopen, PROFIBUS and RS-485 Modbus.
The PositionServo can perform along with the most high-level control and drive solutions in
the market and can work in both a centralized or decentralized control scheme.
If you are looking for Lenze Servo Drives, please call us at (844) 331-9371 or email us at
firstname.lastname@example.org we will do our best to help you find the Lenze
StateLine 9400 Servo Drive that you are looking for at the most competitive prices possible. If you are searching for Lenze HighLine
9400 Servo Drives technical information (data-sheets) please use the Lenze Servo Controller Datasheets
OR Product Selection Guide page links. For a list
of user manuals available, please use Operating Instructions Guide
i700 Servo Inverters
The innovative Servo-Inverter i700 for central motion control is characterised by its compact and highly
flexible design. Dual axes keep the drive size to a minimum, dynamic motor control makes it suitable for use in a wide range of
applications. Drive integration, commissioning and maintenance have been substantially simplified thanks to its installation
concept and easy engineering.
Powerful central motion control of demanding machine tasks is best achieved with our Controller-based
Automation. The Servo-Inverter i700 for multiaxis application can drive all centrally controlled motors in your machine module -
from three-phase AC motor to servo motor. The Servo-Inverter i700 can be directly implemented into the Controller-based
Automation applications via the integrated EtherCAT interface. The interaction of the different Lenze controllers provide for a
high number of sophisticated L-force Motion applications.
9300 Servo Drives
Lenze 9300 intelligent drives are ideally suited to the independent control of subprocesses within a
machine. Taking existing standard applications as a starting point, individual drives can easily be extended with the help of
function blocks that can be interconnected as desired; this takes the pressure off the central control and facilitates modular
mechanical engineering. The series can be used universally in the power range 0.37 to 75 kW.
In order to meet the most diverse servo technology requirements, four software versions are available:
9300 servo drive, 9300 servo positioner, 9300 servo cam profiler, & 9300 servo register controller. By using a
uniform user interface, the need for training is reduced - once you have learned how to use it, this knowledge will never go
to waste. Lenze 9000 servo drives can be integrated into current fieldbus systems easily using the pluggable AIF communication
930 Servo Drives
The intelligent drive Lenze 930 Servos are well-suited for controlling subprocesses of machines
independently. These tiny servo inverters are universal and can deliver a power up to 0.6 kW. With Alternative DC Power
Supply Of 24-48V they can used throughout the world.
- Storage of 64 motion function data
- Single and multi-axis operation
- Resolver or absolute value encoder feedback
- CANopen and RS232 Communication
- Digital and analog inputs/outputs
- Multi Media Card (MMC)
- Positioning control
- Plug and Play Software
- Optimally matched gearbox and servo motor programme
930 Servo Inverters
ECS Servo Inverters
The ECS servo system Servo drives with a high overload capacity designed specifically for multi-axis
applications with high dynamics. The servo system comprises axis modules and power supply modules which can be combined to an
optimised unit for multiaxis applications. The control tasks and motion control functions can be split according to the
application-specific requirements between a central control, e. g. an industrial PC, and the ECS servo system.
A high degree of precision is achieved when carrying out multi-axis co-ordinated movements by transferring
synchronised speed and torque setpoints via the integrated Lenze system bus with microsecond accuracy at cycle times down to 1 ms.
The ECS servo system is therefore optimised for gantry systems, robots, packaging machinery or feeding and removal mechanisms in
handling technology. Lenze's automation system components and ECS servo drives make it very straightforward to set up a complete
automation system with co-ordinated interfaces.
ECS Servo System
The ServoDrives 9400will revolutionise your servo technology with simple clicks.
Our single-axis devices combine mains supply, DC bus and inverter in a single unit. The filter
elements and the brake chopper are integrated in the servo inverter and allow autonomous use in
distributed control cabinet installations. By using corresponding footprint filters (up to 55
kW), greater interference suppression can be achieved without additional mounting area.
Our multi-axis drives are particularly suitable for centralised, compact multi-axis
installations. The energy exchange via the DC bus reduces the power requirement on the mains
side. The axes share the same mains supply, brake chopper and EMC filter. The parts requirements
and installation work are thus significantly reduced. The integrated DC busbar system provides
for compact installations for drives rated up to 15 kW.
The Servo Drives 9400 HighLine feature intelligence in the drive and are therefore designed
for decentralised motion control applications as well as for centralised control topologies.
Whether we have Lenze Servos in stock in Boise, Idaho or need to ship direct from Lenze to any USA cities; CTi can get
Lenze HighLine 9400 Servos to you fast and save you some money. For a list of frequently asked questions or how to
instructions, please use frequently asked questions page link. Our industrial factory automation supplies distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct Lenze
StateLine Servos in the USA, Canada, or Mexico. It will be very helpful if you have the Lenze Servos part numbers ready, then
our sales representatives can provide you with a pricing and availability quote for Lenze Lenze 9400 Series Servos that you
are looking for in seconds. If you do not have the part numbers for Lenze Servos, our application engineers will be able to
help you figure out the part numbers and get the price quote to you as soon as possible.
The Control Board ensures that, despite varying coil
temperature and the resulting variation in coil resistance, the current is constant. This enables the
torque to be kept constant. For certain applications, it is also possible to control the voltage only
by changing a simple switch. Within the limited speed range, a speed control with feedback can be
obtained. The necessary control voltage is supplied by the tacho generator. With varying load,
Based on the PM Brake, the BFK418 was designed for
mounting on the A-bearing side of the motor. Since then, the servo motor technology has been
continuously refined. There has been progress especially in the friction linings and in the increased
power of the magnetic circles. So a spring-applied brake that has been designed as a pure holding
brake can achieve the braking torque of a PM brake that is the same size. In Asia,