The ECS servo system Servo drives with a high overload capacity designed specifically for multi-axis applications with high dynamics. The servo system comprises axis modules and power supply modules which can be combined to an optimised unit for multiaxis applications.
The control tasks and motion control functions can be split according to the application-specific requirements between a central control, e. g. an industrial PC, and the ECS servo system.
ECS Servo Inverters
A high degree of precision is achieved when carrying out multi-axis co-ordinated movements by transferring synchronised speed and torque setpoints via the integrated Lenze system bus with microsecond accuracy at cycle times down to 1 ms. The ECS servo system is therefore optimised for gantry systems, robots, packaging machinery or feeding and removal mechanisms in handling technology.
If you are looking for Lenze ECS Servo Drives, please call us at (844) 331-9371 or email us at firstname.lastname@example.org we will do our best to help you find the Lenze multi-axis servo drive that you are looking for at the most competitive prices possible. If you are searching for Lenze ECS servo system technical information (data-sheets) please use the datasheets or product selection guide page links.
The advantages of the ECS servo system
- High dynamics
- Axis modules can support overloads of between 200% and 300%
- Dynamic energy exchange via DC bus connection
- Central supply modules
- Minimum cabling
- Reduced expenditure on switching elements and fuses on the supply side
- Built-in mains and DC bus monitoring function
- Central interference suppression
- Couldn't be easier to assemble
- Pluggable connection system for power and control terminals which is protected against reverse polarity and is accessible from the front
- Choose between wall mounting, push-through technique or coldplate technique
- Flexible configuration for adaptation to motion control
- Full network capabilities
- 2 CAN interfaces in the axis module as standard
- All popular fieldbus systems are available as optional additional plugin communication modules
- "Safe standstill" in accordance with EN 954-1, control category 3
- UL-approved, CE-compliant
- Built-in motor brake control
- Can be combined with synchronous and asynchronous motors
- Resolver or encoder as feedback system (TTL, SinCos, SinCos absolute value)
- Optimum matching to MCS range of highly dynamic motors
Lenze's automation system components and ECS servo drives make it very straightforward to set up a complete automation system with co-ordinated interfaces. You can achieve high levels of flexibility in the design of your drive configuration through either freely programmable ECS axis modules complying with IEC 61131-3 or through prepared solution packages.
The ETC Motion Control co-ordinates synchronous motions on multiple axes - ranging from simple positioning tasks to 3D path control - and can be programmed using the IEC61131-3 compliant languages. The IP20 I/O system can be used to implement additional input and output terminals. Text displays, graphic displays or touchscreens offer safe and easy ways to operate and monitor the machine. Lenze offers a differentiated range of operating and display units. The standardised integrated development environment optimally integrates displays with the Lenze drives, and so facilitates the project planning process for your particular application.
All of the system components are compatible with the Lenze CAN system bus - which makes it even easier to integrate the system and avoid interface problems. Of course, a range of power-dependent accessories such as mains chokes and EMC filters is also available.
The ECS servo system comes preconfigured for many different application areas. Axis modules with specially tailored versions are available for simple and efficient configuration and commissioning. The "safe standstill" function as specified in EN954-1, Category 3 and control of a motor holding brake with monitoring function is built into all four versions of the controller.
Controller Variants | Axis Modules
- Speed and Torque for general servo applications
- Posi and Shaft for positioning applications and electrical shafts or electrical gearboxes
- Motion for co-ordinated multi-axis applications
- Application for custom modification of the functionality. Freely programmable in the languages specified in IEC 61131-3.
Speed and Torque
Speed and Torque is tailored to the application areas "speed and torque control". The setpoints can either be selected via analog input signals, via the integrated CAN system bus or via fieldbus systems. In addition, there are also up to 15 predefined fixed speeds which can be used. The acceleration ramps can be either linear or S-shaped. A drift-free standstill is provided for quick stops.
Posi and Shaft
Up to 15 positioning profiles can be predefined and stored in this version of the controller. Positioning may be specified as absolute, relative, modulo (that is relative and continuous), or as a manually specified fixed speed value, or as a digital frequency follower. Touch probe positioning in various forms, torque reduction after arrival at the target position and speed override are also implemented. There are eight different options available as referencing modes.
Whether we have Lenze servo inverter in stock in Boise Idaho or need to ship direct from AC Tech to any USA cities; ACTECHDRIVES.COM can get Lenze ECS servo drives to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some Lenze multi-axis servo products enabling us to further assist you in finding the correct Lenze ECS inverter in the USA, Canada, or Mexico. It will be very helpful if you have the Lenze servo drive part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Lenze ECS drive that you are looking for in seconds. If you do not have the part numbers for Lenze multi-axis servos, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
The Self-Contained System is available in three sizes, and with braking torques of 40-250 Nm. It is ideal for use in wind power plants, cranes and textile machines. The INTORQ range of spring-applied brakes is being expanded with the addition of the BFK470 series of sealed designs. This brake has been specifically developed for application areas that place increased requirements on the degree of protection.
AC Tech SCF Series
This Truly Flexible sub-micro drive gives you the compact size you need for your panel layout while delivering on the functions and features your process demands. The SCF Series can be used with 3-phase AC induction motors rated from 1/4 HP up to 30HP (0.18 - 22 kW) on voltages from 120V single-phase to 590 V three-phase. With 18 isolated terminals (5 logic inputs, 2 logic outputs, 2 analog inputs and