AC Tech Drives Lenze Americas
Loading
Home | Contact Us | Sitemap
(800) 894-0412

Lenze Group

Home   >   Products   >   Lenze Drives & Motors

Lenze Drives Motors

(800) 894-0412       (888) 723-4773 (Fax)
info@actechdrives.com

Inverters

Whereas inverter applications are extremely varied, our precisely tailored and uniform product range is much easier to handle. A range tailored to meet your exact needs from basic movements and positioning tasks to servo applications. Our devices are reliable, meet strict quality requirements and can be easily adapted to suit your specific requirements.

With our Inverter Drives 8400 protec and 8400 motec, as well as our SMV IP65 (NEMA 4X) inverters, we offer precisely tailored products with a high degree of protection for decentralized applications, available in either motor-mounting or wall-mounting versions. Their compact design allows the devices to be secured directly to the machine support, for example, thus shortening the length of the motor cables considerably.

Inverters for control cabinet installation are designed for IP20 and IP31 degrees of protection. For some devices, not only is the easy installation mode possible, but also the ability to use the cold-plate or push-through installation technique. The devices can be installed one after the other to save space, and they can be used in a DC bus operation, keeping the wiring efforts to a minimum.

Lenze 8400 TopLine Drive Inverters with Servo Qualities Distributor
VFDs

If you are looking for Lenze Drives, please call us at (800) 894-0412 or email us at info@actechdrives.com we will do our best to help you find the Lenze Motors that you are looking for at the most competitive prices possible. If you are searching for Lenze Servo Inverters technical information (data-sheets) please use the Lenze Datasheets OR Product Selection Guide page links. For a list of user manuals available, please use Operating Instructions page link.

Gearboxes

If you are looking at a power range of up to 45 kW and require a complete range of gearboxes with output torques of up to 14,000 Nm, then the Lenze G-motion range is the right choice.

All of the gearbox types (helical gearboxes, shaft-mounted helical gearboxes, bevel gearboxes, helical-bevel gearboxes, helical-worm gearboxes) come in an extremely compact design which saves space and combines highly dynamic performance levels with low noise generation.

Low wear, high efficiency and reduced backlash are other features which complete the overall picture for these innovative and adaptable gearboxes. In cases where even greater demands are made in terms of dynamics, backlash and torsional rigidity, we can offer our GPA range of planetary gearboxes which is perfect for these applications.

Lenze G500-H Helical Gearbox Distributor
Gearboxes

Servo inverters are ideally suited for precisely and dynamically controlling positioning operations or speeds.

  • Servo Drives 9400 (0.37 - 370 kW) - The latest servo drives include all characteristics of modern servo technology. Due to their special mechanical structure, installation and commissioning of the drive is quick and easy - even in the event of service.
  • 9300 servo inverters (0.37 - 75 kW) - Tried-and-tested servo inverters including Positioner, Cam Profiler, Register Controller, and Servo PLC versions with preconfigured standard applications. Freely interconnectable function blocks can be used for individual extensions.
  • ECS servo system (0.37 - 11 kW) - Optimised for highly dynamic multi-axis applications. Preconfigured standard applications for positioning tasks, coordinated multi-axis motions, or general speed and torque control simplify commissioning.
Lenze L-Force 9400 Series Servo Drives Distributors
L-Force Servo Inverters

Servomotors

Servo motors are designed for all applications requiring precision and dynamic performance.

Our servo motors have been designed to work in perfect harmony with our inverters.

Such a combination results in exact, recurring motion sequences delivered by perfectly coordinated return systems.

Depending on the application and torque requirements, we provide both asynchronous and synchronous motors.

Lenze MCS L-Force Synchronous Servo Motors Distributors
Servomotors

AC Motors

Three-phase AC motors are used in a wide variety of industrial applications. They can be used for both mains operation or for operating an inverter.

The new Lenze Smart Motors and the basic series three-phase AC motors are used for mains operation.

The MD, MH and MF series universal adaptable three-phase AC motors are the right ones for your needs. All motors are scalable and can be modified to suit specific machine requirements.

Lenze L-force MF Three-Phase AC Motors Distributors
Three-Phase AC Motors

Gearmotors

Our gearboxes and geared motors can be used in a wide variety of applications and are functionally scalable. Thanks to their modular design and high power density, extremely compact types of construction are possible.

Our range of products includes industrial geared motors in the power range up to 45 kW, which can easily be adapted to the necessary process parameters thanks to finely graduated gear transmission ratios. The high level of efficiency of our gearboxes and motors ensure an optimised drive package that meets very high requirements.

Lenze GKS Helical-Bevel Gearmotors with MH Three-Phase AC Motors Distributors

Gearmotors

Controls

Packaging machines, robotic and handling systems are often particularly challenging from the standpoint of automation technology.

They require a powerful and homogeneous system capable of controlling coordinated movements along several axes.

The system must also be able to assume the control function of a linear process.

For these automation tasks, you will find the controllers you need for controller-based and drive-based automation.

Lenze Slimline C300 Cabinet Controllers Distributors
Controls

Lenze is one of the leading industrial innovators in Germany and has about 3000 employees worldwide. Some 200 of these work in Research and Development in Germany, focusing on products, solutions, systems and services for mechanical and electronic drives. In the financial year 2004/2005 Lenze recorded a turnover of 466.2 million euro. The company's headquarter is at Hamelin in Germany, where the company was founded in 1947 by Hans Lenze.

Lenze's product range includes frequency inverters, servo drives, geared motors, motors, clutches and brakes. It also features automation solutions with integrated software, visualisation and controls as well as system engineering, coupling technology and services. This is completed by a global service network which can be accessed 24/7 from anywhere in the world. The world is Lenze's market, so you will find us represented in all its major locations. Our largest operational sites are located in Aerzen and Extertal (Germany), Asten (Austria), Shanghai (China) and Uxbridge, Massachusetts (USA).

As well as being at the heart of product development, the ease with which Lenze products can be used, their usability, is to the benefit of our customers. Lenze's new products are modular by design and can be adapted to meet changing requirements. Even safety engineering can be integrated. Although Lenze is a public limited company, the spirit in which the company is run very much reflects its family roots. The high value placed on each individual's contribution is clearly evident every day. It is our employees' commitment to their work that sets them apart. As a multinational corporation, Lenze has one clear goal: to be right there where our customers need us. We are totally committed to meeting the wishes and requirements of our customers. Lenze products can increase the productivity and reliability of machines and plants. Lenze's international network means that we can be there whenever you need us. This creates trust and is the key to our success. We invite you to find out more about the world of Lenze.

Driving, positioning, transporting: these are applications for which Lenze can offer a broad range of components, solutions and services. Lenze drive and automation technology is used in a wide variety of industries, for example in materials handling technology, in the packaging industry, the industrial handling sector, the robotics sector and in automotive construction. Lenze products are carefully co-ordinated and matched and can be combined as required to provide the right solution for your needs. Automation solutions with integrated software and system engineering, connection technology and a global customer service network complete the offer. Our reliability combines with the quality of our products and services to enable us to increase the productivity of our customers in mechanical engineering and that of machine operators.

The increasing level of automation in machines and systems and the consequent rise in the number of I/O devices have in turn increased the amount of wiring required. Decentralised I/O systems bring order to this chaos. Lenze offers two product concepts with IP 20 degree of protection which are suited to both simpler digital applications and more complex automation tasks. Modern systems are often designed in such a way that products can be replaced quickly and without complication. If a high degree of response and accuracy are also required, Lenze's servo drive systems offer the necessary flexibility. Combined drive controller and servo motor packages featuring perfectly matched components provide solutions for a wide variety of requirements. Compared to mechanical and pneumatic solutions, servo technology is not only more responsive and accurate, but also better value for money and more wear resistant.

Frequency inverters are used for electronic speed control on machine drives. The needs of the market are wide and varied, and Lenze can offer a homogeneous range of standard products for everything from simple speed control to complex applications with high requirements in respect of drive behaviour and functionality. Lenze drives are reliable in respect of operation, flexible in terms of application, easy to commission and meet high standards of quality. We can provide a solution to suit any requirement in the power range between 0.25 and 400 kW. We are driven by the demand for machines and systems that can deliver increased productivity, flexibility and safety. If you are looking for a partner with the right expertise, Lenze, with its range of high-performance gearboxes and geared motors with scalable functions, is the perfect choice. Whether you are interested in individual components or complete drive systems, Lenze will be happy to answer any queries you may have about project planning and commissioning and our after sales service staff are always there to help. For a list of how to instructions, Please use Frequently Asked Questions page link.

Whether we have Lenze Motors & Drives in stock in Boise, Idaho or need to ship direct from Lenze to any USA cities; ACTECHDRIVES.COM can get Lenze products to you fast and save you some money! Our industrial factory automation supplies distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct Lenze Drives in the USA, Canada, or Mexico. It will be very helpful if you have the Lenze Motors part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Lenze Brakes & Clutches that you are looking for in seconds. If you do not have the part numbers for Lenze Servo Drives, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Intorq Brakes

Whether Geared Motors or direct drives - our brake systems are precisely matched to your specific requirements. The BFK464-S dual-circuit brake with multi-coil technology has, for example, been optimised for fitting to the new generation of compact direct drives. Also, the kidney-shaped brake callipers of the BFK466 with multi-coil technology have been ideally matched to the contours of axially-short motors

Vogel Gearboxes

By Minimising the Axial Length of the output surface from the roller bearings on the output side, the gearboxes support high radial and axial loads. MPG and MPR substantially differ in the design of the output end. MPR gearboxes feature a free output shaft without a key but with the options of a key or a DIN 5480 splined shaft. MPG gearboxes have a highly rigid flanged output with substantial mounting positions.