AC Tech Drives Lenze Americas


Home   >   Products   >   Lenze   >   0.25 to 45 kW   >   Control Cabinet   >   StateLine   >   8400 Drives

Lenze Drives

Whereas inverter applications are extremely varied, our precisely tailored and uniform product range is much easier to handle. A range tailored to meet your exact needs from basic movements and positioning tasks to servo applications. Our devices are reliable, meet strict quality requirements and can be easily adapted to suit your specific requirements.

Lenze L-Force 8400 StateLine Drive Inverters for Controlled Motion Distributors

8400 StateLine

Operating Instructions

Reference Manual

The 8400 StateLine is ideally suited to drive control with or without speed feedback providing precisely tailored solutions. The StateLine is used when communication via bus systems is required. In addition to this, the integrated brake management ensures significant wear reduction on the service brakes.

Typical applications for the 8400 StateLine include: palletizers, extruders, filling systems or travelling/variable speed drives.

If you are looking for Lenze 8400 StateLine Drives, please call us at (844) 331-9371 or email us at we will do our best to help you find the Lenze 8400 StateLine Frequency Inverters that you are looking for at the most competitive prices possible. If you are searching for Lenze 8400 StateLine Variable Speed Drive technical information (data-sheets) please use the datasheets or product selection guide page links.


  • "VFC eco" energy saving function ensures energy-efficient handling of limited resources
  • Control of synchronous motors without feedback
  • 200% overload current

The 8400 StateLine is intended for drive control with or without speed feedback and is also usedwhen networking via bus systems is needed. The integrated brake management system also delivers greatly reduced wear on the service brakes. Mains switching at too high a rate is also no problem for the StateLine, as the input circuit is protected fromoverload.

The 8400 StateLine is a step up from the BaseLine models for applications that must satisfy more stringent requirements. The StateLine is also ideally suited to applications such as palletizers, extruders, filling systems or travelling/variable speed drives.

The energy-saving function "VFC eco" supported by the 8400 reduces the energy required by the motor in partial load operation. Combine this with an MF L-force three-phase AC motor (inverter-optimised, 120 Hz) and what you get is a highly efficient, compact and cost-effective drive with high dynamic performance and a wide setting range. "VFC eco" can reduce your energy costs by up to 30%.

  • Control types, motor control
    • V/f control without feedback (linear or square-law)
    • V/f control with feedback
    • Sensorless vector control (torque/speed)
    • "VFC eco" energy-saving function
    • Operation with synchronous motors without feedback
  • Basic functions
    • Application-oriented commissioning (predefined applications)
    • Freely assignable user menu
    • Data logger
    • DC brake function
    • Flying restart circuit
    • S-shaped ramps for smooth acceleration
    • Max. output frequency 1000Hz
    • PID controller
    • 15 fixed frequencies
    • Parameter change-over
    • Masking frequencies
    • Switch-off positioning (without feedback)
    • Braking operation without brake resistor
    • Brake management for brake control with low rate of wear
    • Inversion of motor phase sequence
    • Logic functions, comparator, counter, arithmetic function
  • Monitoring and protective measures
    • Short circuit
    • Earth fault
    • Overvoltage
    • Motor stalling
    • I2 x t-Motor monitoring
    • Motor phase failure
    • Mains phase failure
    • Protection against restart for cyclic mains switching (up to 22 kW)
    • Motor overtemperature (input for PTC or thermal contact)
  • Diagnostic interface integrated for USB diagnostic adapter with PC connection or X400 keypad
  • Status display 4 LEDs
  • Brake chopper integrated
  • Brake resistor external

Whether we have 8400 StateLine VFD in stock in Boise, Idaho or need to ship direct from Lenze to any USA cities; can get 8400 StateLine drives to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct 8400 StateLine variable frequency drive in the USA, Canada, or Mexico. It will be very helpful if you have the 8400 StateLine vector frequency inverters part numbers ready, then our sales representatives can provide you with a pricing and availability quote for 8400 StateLine adjustable speed drive that you are looking for in seconds. If you do not have the part numbers for StateLine vector drives, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips
Can't find a part number?
E-mail Us!

Intorq Brakes

Since the Braking Force comes from pressure springs, the braking torque, which is generated by friction, is available when no current is applied even in the event of a mains failure. The brake is released electromagnetically. The BFK457 is ideal for these situations. The speed of fitting with integral fixing screws and fixed air gap make this spring-applied brake even more attractive.

AC Drives

Dust on an Electronic Device can cause malfunction or even failure. Dust absorbs moisture, which also contributes to failure. Periodically spraying air through the heat sink fan is a good PM measure. Discharging compressed air into a VFD is a viable option in some environments, but typical plant air contains oil and water. To use compressed air for cooling, you must use air that is oil-free and dry