AC Tech Drives Lenze Americas


Home   >   Products   >   AC Tech (USA)   >   L-Force   >   8400   >   Drives

Lenze Drives

Whereas inverter applications are extremely varied, our precisely tailored and uniform product range is much easier to handle. A range tailored to meet your exact needs from basic movements and positioning tasks to servo applications. Our devices are reliable, meet strict quality requirements and can be easily adapted to suit your specific requirements.

Lenze 8400 HighLine Drive Inverters for Positioning Tasks Distributors

8400 HighLine

The 8400 HighLine stands out from the 8400 range with its integrated point to point positioning. This allows up to 15 selectable target positions, including their travel profiles, to be saved in the inverter. Depending on accuracy and dynamic requirements, you can choose to position with or without feedback.

Each of the positioning axes is set up for its individual application using the graphic and application specific entry masks of the Engineer software tool. This makes setting parameters, commissioning and diagnostics child's play. The 8400 Highline is recommended for applications without feedback, such as dosing drives, palletisers or feed units, etc.

The 8400 Highline is recommended for applications without feedback, such as dosing drives, palletizers or feed units, etc. Typical applications with feedback include: cross-cutters, rotary tables, lifts and hoists.

If you are looking for Lenze Drives, please call us at (844) 331-9371 or email us at we will do our best to help you find the Lenze 8400 StateLine frequency inverters that you are looking for at the most competitive prices possible. If you are searching for Lenze 8400 HighLine variable speed drive technical information (data-sheets) please use the datasheets or product selection guide page links.

Lenze L-Force 8400 StateLine Drive Inverter for Controlled Motion Distributor

8400 StateLine

The 8400 StateLine is intended for drive control with or without speed feedback and is also used when networking via bus systems is needed.

The integrated brake management system also delivers greatly reduced wear on the service brakes.

Mains switching at too high a rate is also no problem for the StateLine, as the input circuit is protected fromoverload.

The 8400 StateLine is a step up from the BaseLine models for applications that must satisfy more stringent requirements.

The StateLine is also ideally suited to applications such as palletizers, extruders, filling systems or travelling/variable speed drives.

The energy-saving function "VFC eco" supported by the 8400 reduces the energy required by the motor in partial load operation. "VFC eco" can reduce your energy costs by up to 30%.

Lenze L-Force 8400 BaseLine Drive Inverters for Constant Motion Distributors

8400 BaseLine

The BaseLine version is the entry-level model in terms of functionality and drive behaviour.

Featuring an integrated keypad and everything you would expect from a modern frequency inverter suitable for universal use, the 8400 BaseLine is the ideal solution for applications such as conveyor drives, pumps, fans or ventilators.

Two versions of the 8400 BaseLine are available: BaseLine C with CANopen & BaseLine D without communication.

All drive settings for the 8400 are stored on the memory module, which is a pluggable memory chip.

The memory module ensures that drives can be replaced quickly and without errors being made.

Lenze 8400 TopLine Drive Inverters with Servo Qualities Distributor

8400 TopLine

The 8400 TopLine offers the maximum level of functionality and optimum drive behavior within the 8400 series, providing precisely tailored solutions.

Furthermore, TopLine represents a cost effective solution for speed-controlled and position-controlled applications, as well as shaft synchronization.

Typical applications include handling and positioning systems, as well as travelling drives and hoist drives in the most diverse of application areas. The integrated axis bus is also designed for synchronizing drive axes, e. g. when processing material webs.

Whether we have BaseLine VFD in stock in Boise, Idaho or need to ship direct from Lenze to any USA cities; ACTECHDRIVES.COM can get TopLine drives to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct HighLine variable frequency drive in the USA, Canada, or Mexico. It will be very helpful if you have the StateLine vector frequency inverters part numbers ready, then our sales representatives can provide you with a pricing and availability quote for BaseLine adjustable speed drive that you are looking for in seconds. If you do not have the part numbers for TopLine vector drives, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips
Can't find a part number?
E-mail Us!

Intorq Brakes

INTORQ BFK458 spring-applied brakes are single disk brakes with two friction surfaces. When deenergised, several springs are used to generate the braking torque through friction locking. The brake is released electromagnetically. During braking, the springs use the armature plate to press the rotor (which can be shifted axially on the hub) against the counter friction face. When the brakes are applied,

AC Drives

Bad Connections eventually lead to arcing. Arcing at the VFD input could result in nuisance over voltage faults, clearing of input fuses, or damage to protective components. Arcing at the VFD output could result in over-current faults, or even damage to the power components. Photos 3 and 4 show what can happen. Loose control wiring connections can cause erratic operation. For example, a loose START/STOP signal wire