AC Tech Drives Lenze Americas
Loading

Lenze

Home   >   Products   >   New Products   >   Archives

AC Tech Drives

The PositionServo 941 with resolver feedback joins the PositionServo 940 with encoder feedback as the servo drive that has it all - from basic torque control to full programmability!

Comparable in capabilities to most high level motion controllers at a price you would expect to pay for a simple amplifier.

The PositionServo series of drives have it all. From basic torque and velocity control to fully programmable coordinated motion, you choose your level of control.

AC Tech PositionServo 941 Servo Drive Distributor

Introducing AC Tech PositionServo 941

The PositionServo is a fully programmable high performance servo drive with low cost of ownership, low opportunity cost and extremely high value. The drive can function in three fundamental operating modes: torque, velocity, and positioning.

As a distributed drive/control solution, avoid all of the costly cables and connections and put the power of the motion controller in the same package as the drive. With 17 programmable I/O points, machine control becomes easy with one packaged solution.

Each drive ships with commissioning software on CD and allows for a clean Window's based environment for drive setup and programming. Communication and networking are handled over Ethernet as a standard, but the drive can also provide options for RS-485 and Can Open.

The PositionServo can perform along with the most high-level control and drive solutions in the market and can work with both standard synchronous servo motors and asynchronous induction motors. By combining a highly efficient drive with a flexible, easy-to-use control, the PositionServo is packed with features and performance all for a great price!

Stock Check
Part No:
OR
Manufacturer:

Search Tips
Can't find a part number?
E-mail Us!

Lenze Servos

The Interaction of the different Lenze controllers provide for a high number of sophisticated L-force Motion applications. The speed and position control modes are directly executed in the servo inverter which ensures very short cycle times (0.25 ms). The selection of the right control mode for the application is determined via the application in the Controller. Drive dimensioning of multi-axis systems with Servo-Inverters i700 can be easily carried out using

Lenze PC

The Cabinet Version is intended for installation in machine housing. With the same technical specifications as the v800-Protec, this version is an equivalent alternative. The frameless design with narrow edge ensures a streamlined and visually appealing integration thanks to the circumferential seal on the multi-touch glass pane. The devices in this range are ideal for applications that require even more power. The front panels meet the high demands