AC Tech Drives Lenze Americas


Home   >   Products   >   INTORQ   >   Products

Lenze Group

The INTORQ brand stands for reliable brake solutions of the highest standard. Whether in cranes, hoists, electric vehicles,wind turbines or lift systems - INTORQ products are used in the most diverse of applications. Rely on Intorq to create the right solution for your application. Our modular system of INTORQ products are used Worldwide in motors and geared motors and has set the standards worldwide.

Lenze INTORQ Spring-Applied Brake BFK458 The Versatile Modular System 1.5 - 600 Nm Distributors

Spring-Applied Brakes

Spring-applied brakes are electromagnetically actuated and are used where masses have to be decelerated or held in place.

Compression springs provide the braking force, meaning that the friction-generated braking torque is still available when no current is flowing - i.e. even in the event of a mains power failure.

The key factor for brake systems in crane and port facilities and for the offshore sector is brake power due to high hook loads. However, we also place great emphasis on getting the specific details right.

If you are looking for INTORQ Products, please call us at (844) 331-9371 or email us at we will do our best to help you find the INTORQ Clutches that you are looking for at the most competitive prices possible. If you are searching for INTORQ Brakes technical information (data-sheets) please use the datasheets or product selection guide page links.

Intorq Spring-Applied Brakes with Integrated Speed Sensors Distributors

Integrated Speed Sensor

The inductive sensor system can be applied for detecting speed and direction of rotation in brake motors.

The speed sensor and the analysis electronics can replace the sensor bearings that are used in industrial trucks today.

The components are integrated in a way that does not change the overall length of the brake motor. Temperature-resistant sensor head, analysis electronics in a separate housing is an advantage.

INTORQ 14.105 & 14.115 Electromagnetic Clutches & Brakes  7.5-480 Nm Distributors

Clutch-Brake Combination

Electromagnetic clutch-brake combinations have been enjoying market success for a number of years. They are used in all areas of mechanical engineering when a production sequence has to be synchronised. As the drive runs continuously with the clutch rotor, the energy from the upstream drive can be used to accelerate the output. INTORQ 14.105/115 series electromagnetic clutches and brakes are used in these clutch-brake combinations. They are switched alternately in order to accelerate or decelerate the output shaft. Torque transmission is achieved using friction.

Lenze INTORQ Electronic & High-Speed Switchgear with Normal Excitation BEG Rectifiers Distributors

Electronic Switchgear & Accessories

In almost all application cases, the comprehensive range of INTORQ switchgear provides the ideal voltage supply solutions.

INTORQ high-speed switchgear can bring decisive advantages in respect of the control of electromagnetic clutches and brakes and clutch/brake combinations, spring-applied brakes & brakes on brake motors. Switchgear can be controlled by contacts, proximity switches, photoelectric barriers or control voltages (e.g. from a PLC). For some types of switchgear, short change-over pulses will suffice.

Whether we have INTORQ clutch in stock in Boise, Idaho or need to ship direct from Lenze to any USA cities; ACTECHDRIVES.COM can get INTORQ brake to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct INTORQ clutches in the USA, Canada, or Mexico. It will be very helpful if you have the INTORQ brakes part numbers ready, then our sales representatives can provide you with a pricing and availability quote for INTORQ cluth-brake combination that you are looking for in seconds. If you do not have the part numbers for INTORQ Clutch, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips
Can't find a part number?
E-mail Us!

Lenze Drives

Each of the Positioning Axes is set up for its individual application using the graphic and application specific entry masks of the Engineer software tool. This makes setting parameters, commissioning and diagnostics child's play. The 8400 Highline is recommended for applications without feedback, such as dosing drives, palletisers or feed units, etc. Typical applications with feedback include: cross-cutters,

AC Tech SCM Series

AC Tech's SCM Series drive virtually eliminates the need for 2-speed motors and starters and reversing starters, and it can be applied as a "phase-converter" to operate a three-phase motor from a single-phase supply. The SCM is typically a better solution than mechanical variable speed, DC control or eddy-current drives. These easy to use drives are configured and ready to use right out of the box