AC Tech Drives Lenze Americas
Loading

Intorq

Home   >   Products   >   INTORQ   >   Electronic   >   Dual   >   Switch

Lenze Group

The EDS 48 electronic dual switch contains the complete current supply for a 24 V DC voltage coil and can be operated using control voltages (e.g. from a PLC) or pulses. A pulse at the START input will engage the clutch until a pulse at the STOP input disengages the clutch and applies the brake. A program switch can be used to preselect the type of brake to be controlled (electromagnetic or springoperated brake).

Lenze INTORQ 14.640.10.048 EDS 48 Electronic Dual Switch Distributor

14.640.10.048 EDS 48 Electronic Dual Switch

When using spring-operated brakes, the transformer power must be dimensioned for the sum of the clutch and braking powers.

Delay times can be set on two potentiometers to prevent clutches and brakes that do not have a common armature plate working in opposition.

The input electronics are potential-free and isolated from the power section by an optocoupler.

If you are looking for INTORQ Electronic Dual Switch, please call us at (800) 894-0412 or email us at info@actechdrives.com we will do our best to help you find the INTORQ 14.640.10.048 that you are looking for at the most competitive prices possible. If you are searching for INTORQ EDS 48 technical information (data-sheets) please use the datasheets or product selection guide page links.

Application Area:

  • Using 24 V standard excitation to switch:
    • Clutch/brake combinations
    • Other coils which are to be switched on the DC side in alternating or parallel operation
  • The EDS 48 electronic dual switch is ideal for controlling two coils.

For safety reasons, the clutch is always set to "Off" and the brake to "On" following mains connection or the closing of switch a1. The device is able to execute the first start command (clutch On) approximately one second later. If a start command is already present at the input before the mains connection is made, the brake remains switched on until a new start command is sent. If required, switch a1 can serve as an "emergency-off" switch.

Whether we have INTORQ 14.640.10.048 in stock in Boise, Idaho or need to ship direct from Lenze to any USA cities; ACTECHDRIVES.COM can get INTORQ accessories to you fast and save you some money.

Our industrial factory automation supplies distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct INTORQ electronic dual switch in the USA, Canada, or Mexico.

It will be very helpful if you have the INTORQ EDS 48 part numbers ready, then our sales representatives can provide you with a pricing and availability quote for INTORQ electronic dual switches that you are looking for in seconds.

If you do not have the part numbers for INTORQ accessories, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips
Can't find a part number?
E-mail Us!

Lenze Gearbox

Helical-Bevel Gearboxes have the major benefit of enabling extremely precise and reproducible positioning movements owing to their high torsional stiffness and low backlash. Our helical-bevel gearboxes can be combined with three-phase AC motors and servo motors to form a compact unit. They are available in 3- and 4-stage versions with a torque of up to 11,639 Nm and a ratio of up to i=1,936.

Lenze Motors

Compared with IE2 Class Motors, the new Lenze motor range reduces energy lost and cost by up to 20 percent. Designed for demanding variable motion duty, the Lenze m550-P three-phase AC motor provides a power range of 1 to 60 Hp (0.75kW to 45kW) with a variety of voltages for simple mains operation with fixed speeds. Optimized for use with frequency inverters, the m550-P motors pair seamlessly with high efficiency Lenze g500 gearboxes.