AC Tech Drives Lenze Americas
Loading

AC Technology Corporation

Home   >   Products   >   Lenze Americas   >   Sub-Micro Drives

AC Tech Drives

Inverters for control cabinet installation are designed for IP20 and IP31 degrees of protection. For some devices, not only is the easy installation mode possible, but also the ability to use the cold-plate or push-through installation technique. The devices can be installed one after the other to save space, and they can be used in a DC bus operation, keeping the wiring efforts to a minimum.

AC Tech SMVector Series Inverter Drives Distributors

SMVector Series

Our most technically advanced inverter drive continues Lenze - AC Tech's tradition of innovative compact inverter design. The performance and flexibility make the SMVector an attractive solution for a broad range of AC motor applications and with several communications protocols available, networking drives and components into a system solution can be done now or in the future.

The SMVector NEMA 1 (IP31) is the most common and cost effective drive enclosure for a wide range of applications including packaging, material handling/conveying, positive displacement pumping, and HVAC systems. The SMVector NEMA 4X (IP65) is available in two enclosure materials - for indoor only use and for indoor/outdoor use. SMVector with Integral Disconnect is available in a rugged NEMA 4X (IP65) indoor enclosure.

If you are looking for AC Tech Sub-Micro Drives, please call us at (800) 894-0412 or email us at info@actechdrives.com we will do our best to help you find the AC Tech Drives that you are looking for at the most competitive prices possible. If you are searching for AC Tech Sub-Micro Drive technical information (data-sheets) please use the datasheets or product selection guide page links.

AC Tech SCM Series Sub-Micro Drives Distributor

SCM: Basic & Beyond

Feature-rich for motor control applications that require variable speed, and cost effective enough for those that do not.

The SCM Series drive virtually eliminates the need for 2-speed motors and starters and reversing starters, and it can be applied as a "phase-converter" to operate a three phase motor from a single-phase supply.

The SCM is typically a better solution than mechanical variable speed, DC control or eddy-current drives.

IP 20 enclosure with power terminals on top, motor terminals on the bottom & one relay and one open-collector output.

Optional footprint filter, 0-10 VDC or 4-20 mA speed reference & up to 8 selectable preset speeds.

Isolated start/stop plus 3 programmable inputs & DC injection braking on stop (up to 1 hr).

Lenze SMD Compact Frequency Inverters Distributor

SMD IP20 V/f Control with Basic & Full I/O

The smd series was designed to address the needs of a simple V/Hz drive that was suited for a global marketplace. The smd drives are consistent with the Lenze 8200 inverter drives in their design and packaging concepts and are manufactured to comply with applicable EU standards for industrial installations of electric motor drives.

The smd with basic I/O is an IP20 enclosed drive available from 0.25 to 4kW for input voltages of 200/230V 1 or 3 phase. 10 I/O terminals provide speed reference plus programmable inputs and relay output. The smd with full I/O is an IP20 enclosed drive available from 0.37 to 22kW for input voltages of 200/230V 1 or 3 phase and 400/480 VAC 3-phase. 15 I/O terminals provide speed reference plus programmable analog and digital inputs and outputs as well as a relay output. RS-485 Modbus RTU/LECOM communications are standard as well. CANopen Variants are also available.

AC Tech SCF Series Sub-Micro Drives Distributor

SCF: Full Featured

When your application requires more functionality,the SCF has the additional I/O to meet your needs.

2-wire RS485 network communication using Modbus RTU protocol is standard. The SCF allows for either 2-wire or 3-wire start/stop without programming!

The SCF has optional models that offer setpoint (PI) control or control for high-speed motors up to 1000Hz output frequency.

IP 20 enclosure with power terminals on top, motor terminals on the bottom & two open-collector outputs w/ internal power supply, can drive external relays.

Isolated start/stop plus 3 programmable inputs & DC injection braking on stop (up to 1 hr).

0-10 VDC or 4-20 mA speed reference & up to 8 selectable preset speeds.

AC Tech SCL Series Integrated Line Filter Drives Distributors

SCL: Basically European

Based on the SCM drive, the SCL targets European single-phase applications that require conformance to the European Union standard for noise immunity: EN 61800-3, Class A.

The SCL has a line filter built-in to meet the rigorous European standard for EMI and RFI noise suppression.

IP 20 enclosure with power terminals on top, motor terminals on the bottom & isolated start/stop plus 3 programmable inputs.

Integral line filter, 0-10 VDC or 4-20 mA speed reference, up to 8 selectable preset speeds & DC injection braking on stop (up to 1 hr).

AC Tech EPM (Electronic Programming Module) is a standard feature on all SC and TC series drives as described above. This concept of a removable memory structure offers significant benefits for OEM's and users alike. AC Tech EPM and EPM Programmer features include Copy drive settings in 2 seconds, Back-up programs to computer hard-drive or disk, Program without power, Simplify Troubleshooting and more.

Whether we have AC Tech sub-micro drives in stock in Boise Idaho or need to ship direct from AC Tech to any USA cities; ACTECHDRIVES.COM can get AC Tech drives to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct AC Tech drives in the USA, Canada, or Mexico. It will be very helpful if you have the AC Tech sub-micro drive part numbers ready, then our sales representatives can provide you with a pricing and availability quote for AC Technology inverters that you are looking for in seconds. If you do not have the part numbers for AC Tech VFD drives, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips
Can't find a part number?
E-mail Us!

Lenze Drives

Lenze's compact 8400 motec motor inverter is an attractive alternative, particularly for intralogistic applications as well as pumps and fans and guarantees a high degree of efficiency in every respect. It can be mounted either on the geared motor or on the wall and is available in a power range of 0.37 to 7.5 kW. Energy savings of up to 30% are possible in connection with the MF motor series, which is exclusively tailored to

Intorq Accessories

The Spring Force or torque can be increased by up to 40%, please contact us for more information. In principle, operating frequency can be increased by using the SEGC switchgear. However, the max. permissible switching energy of the clutch or brake must not be exceeded. INTORQ SEGC high-speed switchgear are used for highspeed coil excitation at a rated voltage of 24 - 215 V.