AC Tech Drives Lenze Americas
Loading

AC Technology Corporation

Home   >   Products   >   Lenze Americas   >   MC3000 Series   >   Drives

AC Tech Drives

AC Tech MC3000 series is the choice when your process control demands fast acceleration and response.

Designed expressly for use where the motor control is an integral part of a process, the M3000 is rated for constant torque applications but can easily be configured for variable torque applications.

AC Tech MC3000 Series Enclosed-Micro Drives Distributor

MC3000 Series Drives

Quick Reference Guide

Installation & Operation Manual

Remote Keypad Mounting Instructions

Dynamic Braking & Form C Relay Installation Instructions

Metasys N2 Communications Guide

Most "process control" drives are designed for variable torque applications where the motor is driving a centrifugal fan or pump.

As such, these drives are limited to 110% current for overload situations such as acceleration or responding to a feedback change.

If you are looking for AC Tech MC3000 Industrial Drives, please call us at (800) 894-0412 or email us at info@actechdrives.com we will do our best to help you find the AC Tech MC3000 VFD that you are looking for at the most competitive prices possible. If you are searching for AC Tech MC3000 VFD technical information (data-sheets) please use the datasheets or product selection guide page links.

AC Tech MC3000 is a true constant torque drive rated for 180% of rated current for 30 seconds and 150% for one minute; this allows faster response to system changes and the ability to apply the MC3000 to non-centrifugal applications such as compressors, conveyors and other "constant torque" loads. The M3000 is available in the same power ranges and voltages as the M1000.

Features:

  • Speed synchronized automatic restart after fault
  • Loss of follower signal action: fault or go to preset speed
  • Control configuration: local, remote, serial communications, keypad, terminal strip, PID mode
  • Adjustable units display: PSI, CFM, GPM, FPM, IN, FT, Hz, RPM, %, /SEC, /MIN, /HR, none
  • Auxiliary outputs - two open collector outputs and a Form C relay: Functions include Loss of Speed Reference Signal, PID High/Low Alarms in addition to those listed for the M1000.
  • PID: direct or reverse acting with adjustable Proportional, Integral, and Derivative gains, Signal Calibration, high and low level alarms.
  • Sleep mode with adjustable speed threshold and time.
  • Metasys Serial Communication Protocol (optional)
  • Modbus Serial Communication Protocol (standard)

Options:

Expand the capabilities of your MC drive with the following options. All options can be factory installed or field installed.

  • Dynamic Braking: for faster stopping or deceleration
  • Additional Form-C relay
  • Remote Keypad
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 1 Models 120 Volt 1 Phase Input*
M3103SB 0.25 0.18 1.4 7.50 (190) 4.70 (119) 3.33 (85)
M3105SB 0.5 0.37 2.2 7.50 (190) 6.12 (155) 3.63 (92)
M3110SB 1 0.75 4.0 7.50 (190) 6.12 (155) 4.22 (107)
M3115SB 1.5 1.1 5.2 7.50 (190) 6.12 (155) 4.22 (107)
Output is three-phase
Output voltage will be twice line voltage when connected to a 120V source.
Output voltage will not exceed line voltage when connected to a 240V source.
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 4 Models 120 Volt 1 Phase Input*
M3103SC 0.25 0.18 1.4 7.88 (200) 6.12 (155) 3.63 (92)
M3105SC 0.5 0.37 2.2 7.88 (200) 7.86 (200) 3.75 (95)
M3110SC 1 0.75 4.0 7.88 (200) 7.86 (200) 4.90 (124)
M3115SC 1.5 1.1 5.2 7.88 (200) 7.86 (200) 4.90 (124)
Output is three-phase
Output voltage will be twice line voltage when connected to a 120V source.
Output voltage will not exceed line voltage when connected to a 240V source.
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 4X (Stainless) Models 120 Volt 1 Phase Input*
M3103SE 0.25 0.18 1.4 7.88 (200) 6.12 (155) 3.63 (92)
M3105SE 0.5 0.37 2.2 7.88 (200) 7.86 (200) 3.75 (95)
M3110SE 1 0.75 4.0 7.88 (200) 7.86 (200) 4.90 (124)
M3115SE 1.5 1.1 5.2 7.88 (200) 7.86 (200) 4.90 (124)
Output is three-phase
Output voltage will be twice line voltage when connected to a 120V source.
Output voltage will not exceed line voltage when connected to a 240V source.
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 1 Models - 240 Volt 1 Phase input
M3205SB 0.5 0.37 2.2 7.50 (190) 4.70 (119) 3.63 (92)
M3210SB 1 0.75 4.0 7.50 (190) 4.70 (119) 4.33 (110)
M3215SB 1.5 1.1 5.2 7.50 (190) 6.12 (155) 4.22 (107)
M3220SB 2 1.5 6.8 7.50 (190) 6.12 (155) 5.12 (130)
M3230SB 3 2.2 9.6 7.50 (190) 6.12 (155) 5.12 (130)
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 4 Models - 240 Volt 1 Phase input
M3205SC 0.5 0.37 2.2 7.88 (200) 6.12 (155) 4.35 (110)
M3210SC 1 0.75 4.0 7.88 (200) 6.12 (155) 4.35 (110)
M3215SC 1.5 1.1 5.2 7.88 (200) 7.86 (200) 4.90 (124)
M3220SC 2 1.5 6.8 7.88 (200) 7.86 (200) 4.90 (124)
M3230SC 3 2.2 9.6 7.88 (200) 7.86 (200) 5.90 (150)
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 4X (Stainless) Models - 240 Volt 1 Phase input
M3205SE 0.5 0.37 2.2 7.88 (200) 6.12 (155) 4.35 (110)
M3210SE 1 0.75 4.0 7.88 (200) 6.12 (155) 4.35 (110)
M3215SE 1.5 1.1 5.2 7.88 (200) 7.86 (200) 4.90 (124)
M3220SE 2 1.5 6.8 7.88 (200) 7.86 (200) 4.90 (124)
M3230SE 3 2.2 9.6 7.88 (200) 7.86 (200) 5.90 (150)
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 1 Models - 208/240 Volt 3 Phase input
M3205B 0.5 0.37 2.2 7.50 (190) 4.70 (119) 3.63 (92)
M3210B 1 0.75 4.0 7.50 (190) 4.70 (119) 4.33 (110)
M3215B 1.5 1.1 5.2 7.50 (190) 4.70 (119) 4.33 (110)
M3220B 2 1.5 6.8 7.50 (190) 6.12 (155) 5.12 (130)
M3230B 3 2.2 9.6 7.50 (190) 6.12 (155) 5.12 (130)
M3250B 5 4.0 15.2 7.88 (200) 7.86 (200) 5.94 (151)
M3275B 7.5 5.5 22 9.38 (238) 7.86 (200) 6.84 (174)
M32100B 10 7.5 28 11.25 (286) 7.86 (200) 6.84 (174)
M32150B 15 11 42 12.75 (324) 7.86 (200) 6.84 (174)
M32200B 20 15 54 12.75 (324) 10.26 (261) 7.74 (197)
M32250B 25 18.5 68 15.75 (400) 10.26 (261) 8.35 (212)
M32300B 30 22 80 15.75 (400) 10.26 (261) 8.35 (212)
M32400B 40 30 104 25.00 (635) 13.00 (330) 10.50 (267)
M32600B 60 45 154 47.00 (1194) 16.64 (423) 11.85 (301)
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 4 Models - 208/240 Volt 3 Phase input
M3205C 0.5 0.37 2.2 7.88 (200) 6.12 (155) 4.35 (110)
M3210C 1 0.75 4.0 7.88 (200) 6.12 (155) 4.35 (110)
M3215C 1.5 1.1 5.2 7.88 (200) 6.12 (155) 5.25 (133)
M3220C 2 1.5 6.8 7.88 (200) 7.86 (200) 4.90 (124)
M3230C 3 2.2 9.6 7.88 (200) 7.86 (200) 5.90 (150)
M3250C 5 4.0 15.2 9.75 (248) 10.26 (261) 7.20 (183)
M3275C 7.5 5.5 22 11.75 (298) 10.26 (261) 8.35 (212)
M32100C 10 7.5 28 13.75 (349) 10.26 (261) 8.35 (212)
M32150C 15 11 42 15.75 (400) 10.26 (261) 8.35 (212)
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 4X (Stainless) Models - 208/240 Volt 3 Phase input
M3205E 0.5 0.37 2.2 7.88 (200) 6.12 (155) 4.35 (110)
M3210E 1 0.75 4.0 7.88 (200) 6.12 (155) 4.35 (110)
M3215E 1.5 1.1 5.2 7.88 (200) 6.12 (155) 5.25 (133)
M3220E 2 1.5 6.8 7.88 (200) 7.86 (200) 4.90 (124)
M3230E 3 2.2 9.6 7.88 (200) 7.86 (200) 5.90 (150)
M3250E 5 4.0 15.2 9.75 (248) 10.26 (261) 7.20 (183)
M3275E 7.5 5.5 22 11.75 (298) 10.26 (261) 8.35 (212)
M32100E 10 7.5 28 13.75 (349) 10.26 (261) 8.35 (212)
M32150E 15 11 42 15.75 (400) 10.26 (261) 8.35 (212)
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 12 Models - 208/240 Volt 3 Phase input
M32200D 20 15 54 15.75 (400) 10.26 (261) 8.35 (212)
M32250D 25 18.5 68 20.25 (514) 10.26 (261) 8.35 (212)
M32300D 30 22 80 20.25 (514) 10.26 (261) 8.35 (212)
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 1 Models - 400/480 Volt 3 Phase input
M3410B 1 0.75 2.3 7.50 (190) 4.70 (119) 3.63 (92)
M3420B 2 1.5 3.9 7.50 (190) 6.12 (155) 4.22 (107)
M3430B 3 2.2 5.5 7.50 (190) 6.12 (155) 5.12 (130)
M3450B 5 4.0 8.7 7.50 (190) 6.12 (155) 5.12 (130)
M3475B 7.5 5.5 12.6 9.38 (238) 7.86 (200) 6.25 (159)
M34100B 10 7.5 16.0 9.38 (238) 7.86 (200) 6.84 (174)
M34150B 15 11 24 11.25 (286) 7.86 (200) 6.84 (174)
M34200B 20 15 31 12.75 (324) 7.86 (200) 6.84 (174)
M34250B 25 18.5 39 12.75 (324) 10.26 (261) 7.74 (197)
M34300B 30 22 46 12.75 (324) 10.26 (261) 7.74 (197)
M34400B 40 30 60 15.75 (400) 10.26 (261) 8.35 (212)
M34500B 50 37.5 75 19.75 (502) 10.26 (261) 8.55 (217)
M34600B 60 45 88 19.75 (502) 10.26 (261) 8.55 (217)
M34750B 75 55 110 29.00 (737) 16.64 (423) 11.85 (301)
M341000B 100 75 143 29.00 (737) 24.42 (620) 11.85 (301)
M341250B 125 90 179 29.00 (737) 24.42 (620) 11.85 (301)
M341500B 150 110 207 29.00 (737) 36.66 (931) 11.85 (301)
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 4 Models - 400/480 Volt 3 Phase input
M3410C 1 0.75 2.3 7.88 (200) 6.12 (155) 4.35 (110)
M3420C 2 1.5 3.9 7.88 (200) 7.86 (200) 4.90 (124)
M3430C 3 2.2 5.5 7.88 (200) 7.86 (200) 4.90 (124)
M3450C 5 4.0 8.7 7.88 (200) 7.86 (200) 5.90 (150)
M3475C 7.5 5.5 12.6 9.75 (248) 10.26 (261) 7.20 (183)
M34100C 10 7.5 16.0 11.75 (298) 10.26 (261) 8.35 (212)
M34150C 15 11 24 13.75 (349) 10.26 (261) 8.35 (212)
M34200C 20 15 31 15.75 (400) 10.26 (261) 8.35 (212)
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 4X (Stainless) Models - 400/480 Volt 3 Phase input
M3410E 1 0.75 2.3 7.88 (200) 6.12 (155) 4.35 (110)
M3420E 2 1.5 3.9 7.88 (200) 7.86 (200) 4.90 (124)
M3430E 3 2.2 5.5 7.88 (200) 7.86 (200) 4.90 (124)
M3450E 5 4.0 8.7 7.88 (200) 7.86 (200) 5.90 (150)
M3475E 7.5 5.5 12.6 9.75 (248) 10.26 (261) 7.20 (183)
M34100E 10 7.5 16.0 11.75 (298) 10.26 (261) 8.35 (212)
M34150E 15 11 24 13.75 (349) 10.26 (261) 8.35 (212)
M34200E 20 15 31 15.75 (400) 10.26 (261) 8.35 (212)
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 12 Models - 400/480 Volt 3 Phase input
M34250D 25 18.5 39 15.75 (400) 10.26 (261) 8.35 (212)
M34300D 30 22 46 15.75 (400) 10.26 (261) 8.35 (212)
M34400D 40 30 60 20.25 (514) 10.26 (261) 8.35 (212)
M34500D 50 37.5 75 21.00 (533) 13.72 (348) 8.35 (212)
M34600D 60 45 88 21.00 (533) 13.72 (348) 8.35 (212)
M34750D 75 55 110 37.00 (940) 18.00 (457) 13.30 (338)
M341000D 100 75 143 39.00 (991) 26.00 (660) 13.30 (338)
M341250D 125 90 179 39.00 (991) 26.00 (660) 13.30 (338)
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 1 Models - 575 Volt 3 Phase input
M3510B 1 0.75 1.6 7.50 (190) 4.70 (119) 3.63 (92)
M3520B 2 1.5 2.7 7.50 (190) 6.12 (155) 4.22 (107)
M3530B 3 2.2 3.9 7.50 (190) 6.12 (155) 5.12 (130)
M3551B 5 4.0 6.1 7.88 (200) 7.86 (200) 5.94 (151)
M3575B 7.5 5.5 9.0 9.38 (238) 7.86 (200) 6.25 (159)
M35100B 10 7.5 11.0 9.38 (238) 7.86 (200) 7.40 (188)
M35150B 15 11 17.0 12.75 (324) 7.86 (200) 6.84 (174)
M35200B 20 15 22 12.75 (324) 7.86 (200) 7.40 (188)
M35250B 25 18.5 27 12.75 (324) 10.26 (261) 7.74 (197)
M35300B 30 22 32 12.75 (324) 10.26 (261) 8.25 (210)
M35400B 40 30 41 15.75 (400) 10.26 (261) 8.35 (212)
M35500B 50 37.5 52 19.75 (502) 10.26 (261) 8.55 (217)
M35600B 60 45 62 19.75 (502) 10.26 (261) 8.55 (217)
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 4 Models - 575 Volt 3 Phase input
M3510C 1 0.75 1.6 7.88 (200) 6.12 (155) 4.35 (110)
M3520C 2 1.5 2.7 7.88 (200) 7.86 (200) 4.90 (124)
M3530C 3 2.2 3.9 7.88 (200) 7.86 (200) 4.90 (124)
M3550C 5 4.0 6.1 7.88 (200) 7.86 (200) 5.90 (150)
M3575C 7.5 5.5 9.0 9.75 (248) 10.26 (261) 7.20 (183)
M35100C 10 7.5 11.0 11.75 (298) 10.26 (261) 8.35 (212)
M35150C 15 11 17.0 13.75 (349) 10.26 (261) 8.35 (212)
M35200C 20 15 22 15.75 (400) 10.26 (261) 8.35 (212)
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 4X (Stainless) Models - 575 Volt 3 Phase input
M3510E 1 0.75 1.6 7.88 (200) 6.12 (155) 4.35 (110)
M3520E 2 1.5 2.7 7.88 (200) 7.86 (200) 4.90 (124)
M3530E 3 2.2 3.9 7.88 (200) 7.86 (200) 4.90 (124)
M3550E 5 4.0 6.1 7.88 (200) 7.86 (200) 5.90 (150)
M3575E 7.5 5.5 9.0 9.75 (248) 10.26 (261) 7.20 (183)
M35100E 10 7.5 11.0 11.75 (298) 10.26 (261) 8.35 (212)
M35150E 15 11 17.0 13.75 (349) 10.26 (261) 8.35 (212)
M35200E 20 15 22 15.75 (400) 10.26 (261) 8.35 (212)
Model Number Power Current Output Dimensions inches (mm)
Hp kW H W D
NEMA 12 Models - 575 Volt 3 Phase input
M35250D 25 18.5 27 15.75 (400) 10.26 (261) 8.35 (212)
M35300D 30 22 32 15.75 (400) 10.26 (261) 8.35 (212)
M35400D 40 30 41 20.25 (514) 10.26 (261) 8.35 (212)
M35500D 50 37.5 52 21.00 (533) 13.72 (348) 8.35 (212)
M35600D 60 45 62 21.00 (533) 13.72 (348) 8.35 (212)

Whether we have AC Tech industrial drives in stock in Boise Idaho or need to ship direct from Lenze to any USA cities; ACTECHDRIVES.COM can get AC Tech MC series drives to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct AC Tech MC3000 inverter in the USA, Canada, or Mexico. It will be very helpful if you have the AC Tech enclosed-micro VFD part numbers ready, then our sales representatives can provide you with a pricing and availability quote for AC Technology inverters that you are looking for in seconds. If you do not have the part numbers for AC Tech MC3000 VFD, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips
Can't find a part number?
E-mail Us!

Lenze Drives

The Integrated Brake management system also delivers greatly reduced wear on the service brakes. Mains switching at too high a rate is also no problem for the StateLine, as the input circuit is protected fromoverload. The 8400 StateLine is a step up from the BaseLine models for applications thatmust satisfymore stringent requirements. The StateLine is also ideally suited to applications such as palletizers,

Intorq Accessories

The High Induced Voltage enables the switch off times indicated in the catalogue for switching on the DC side to be achieved. Transformer switch TS 48 contains the entire current supply for a 24 V DC coil with transformer, rectifier and switching transistor with suppressor circuit. The transistor is used for switching; there is no contact erosion.