AC Tech Drives Lenze Americas
Loading

AC Technology Corporation

Home   >   Products   >   Lenze Americas   >   EPM Programming Module

AC Tech Drives

Never before has programming an adjustable speed inverter been so easy, so convenient, and so fast. The advantages of the AC Technology Electronic Programming Module (EPM) extend throughout the life of your drive and beyond.

You will save time and resources, reduce errors, and increase efficiency. Once you try it, you will never want to go back to the cumbersome traditional programming methods again. When you use AC Tech drives that employ EPM technology, you automatically get the following benefits:

AC Tech Electronic Programming Module EPM Distributors

EPM Modules

One Button Programming:

Simply plug an EPM into the EPM Programmer and press "Transfer to EPM".

In 2 seconds the EPM is ready to be installed into an AC Tech SC series or TC series drive.

The hand held EPM programmer allows you to select the source of the program to be installed, either from another previously programmed EPM, from a file within the EPM Programmer, or from a file on your personal computer.

If you are looking for AC Tech EPM Programming Module, please call us at (844) 331-9371 or email us at info@actechdrives.com we will do our best to help you find the AC Tech Drives that you are looking for at the most competitive prices possible. If you are searching for AC Tech Drive technical information (data-sheets) please use the datasheets or product selection guide page links.

Easy Archiving to Your PC:

Use the EPM Programmer to save a drives program. This hand-held device holds up to 30 program files, and by using the Tech-Link Software and a standard RS-232 cable, you can archive the programs to your PC. The AC Tech EPM Programmer lets you save from and write to EPM's. It also allows you to edit a program using the 16 character display . Instead of using parameter codes, you see a full description of each parameter and selection.

Job Change-Overs Are a Snap

Some machines and processes are multi-use and require the drive to be reprogrammed for the particular job. If your drive uses the EPM, instead of reprogramming, all you need to do is simply remove the EPM for the old job and insert an EPM that has been pre-programmed with the new requirements. No errors, no downtime. Change-over can usually be done by the machine operator using a pair of common needle nose pliers, rather than requiring a skilled technician or engineer.

OEM Machine Defaults:

The EPM Programmer saves the drives configuration to two memory locations in the EPM, one that is changeable from the front of the drive and one that serves as the OEM's machine default setting. If the end-user of the machine were to reprogram the drive causing the machine to malfunction, the drive can easily and quickly be reset back to the OEM's original settings. The default feature is a significant improvement over traditional technology that requires the drive to be reset back to the drive manufacturer's defaults, and then calls for a skilled technician or engineer to reconstruct the OEM's programming. This unique capability of the EPM has saved AC Tech OEM customers immeasurable time in assisting their own customers to get back up and running in the shortest possible time, often eliminating a service call.

A Troubleshooting Assist

In installations where two or more drives are programmed to perform the same job, and one installation works fine but the other one is encountering difficulty, the EPM allows the drive programming to be targeted or eliminated as a potential cause of the problem. Simply by switching EPMs between the working and non-working units, you can determine the cause of the failure. If the problem moves with the EPM, the root is in the programming. You can utilize this test even if the drives are of two different ratings. Again, this feature saves the OEM's time and resources in assisting customers, and results in greater customer satisfaction.

Re-Use The Memory

Yet another great time and money-saving benefit the EPM offers you, if the drive is ever damaged and needs to be replaced, the EPM is probably still good. Replace the drive, wire it for the job and insert the old EPM. No other programming necessary.

Whether we have AC Tech Drives in stock in Boise Idaho or need to ship direct from AC Tech Drives to any USA cities; ACTECHDRIVES.COM can get AC Tech Drives to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct AC Tech drives in the USA, Canada, or Mexico. It will be very helpful if you have the AC Tech EPM programming module part numbers ready, then our sales representatives can provide you with a pricing and availability quote for AC Technology inverters that you are looking for in seconds. If you do not have the part numbers for AC Tech VFD drives, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips
Can't find a part number?
E-mail Us!

Lenze Drives

The 8400 StateLine is ideally suited to drive control with or without speed feedback providing precisely tailored solutions. The StateLine is used when communication via bus systems is required. In addition to this, the integrated brake management ensures significant wear reduction on the service brakes. Typical applications for the 8400 StateLine include: palletizers, extruders, filling systems or travelling/ variable speed drives.

Intorq Accessories

The Transformer Switch TS 48 from Intorq contains the entire current supply for a 24 V DC coil with transformer, rectifier and switching transistor with suppressor circuit. The transistor is used for switching; there is no contact erosion. The high induced voltage enables the switch off times indicated in the catalogue for switching on the DC side to be achieved.